Snort network scan config

[bobsana666]

I Follow the guide and everything is fine but Alerts in Base are only for the PC that is the system installed.

Is there the way that can scan all PC's in the network.

I mean that i see traffic only for my PC IP 192.168.1.161 but i wanna see other PC's traffic.

Thank you.

[Morpheus]

The Windows Intrusion Detection System is probably plugged into a SWITCH. The Windows Intrusion Detection System needs to be plugged into a HUB with all the other PC's  on the network, or if The Windows Intrusion Detection System is plugged into a SWITCH all the ports for the PC's to be monitored  MUST be mirrored to the port The Windows Intrusion Detection System is plugged into.

 

You could do this

[bobsana666]

 I manually add rules from YOUR GUIDE

and after that i see all the traffic. Your information is helpful too. THANK YOU !!!